Window film forprivacy, heat,glare and safety
Privé assesses existing glass and recommends film for comfort, daytime privacy, UV protection, safety, and appearance.
WHAT WINDOW FILM CAN SOLVE
Choose the problem that sounds most like your space. See what window film can change, what it preserves, and which solution may fit.
Direct sun through large areas of glass can raise indoor temperatures and make rooms uncomfortable.
Solar control film can reduce the solar energy entering through the glass while preserving a usable level of natural light.
Performance depends on the selected film, glass construction, orientation, and exposure.
Solar controlStrong daylight can wash out screens and create uncomfortable reflections in homes and workplaces.
Solar control film can reduce glare while keeping the window and a useful amount of daylight.
The visible tint and glare reduction vary by product, glass, and exposure.
Bright room with large windows and a clear view
Glare controlStreet facing and ground floor glass can leave interiors exposed when the blinds are open.
Reflective and selected privacy films can limit the daytime view into a space while preserving daylight and an outward view.
Privacy depends on the light balance. When the interior is brighter at night, film alone does not provide the same privacy.
Ground floor corner glazing viewed from the sidewalk
Privacy filmsUV exposure contributes to fading and colour change in flooring, furnishings, artwork, and interior finishes.
Selected window films can block up to 99 percent of UV while allowing visible light through the glass.
Film helps reduce fading, but no product can eliminate every cause. Heat, visible light, material, and exposure also matter.
Wood floor showing a colour difference where a rug limited sun exposure
Solar controlWhen untreated glass breaks, loose fragments and a rapid opening can increase the risk to people and property.
Safety and security films bond to the glass and can help retain fragments after impact.
The correct system depends on the threat, the glass, the frame, and the required performance. Film does not make glass unbreakable.
Cracked glass held together within its frame
Safety and security filmsClear glass does not always provide the privacy, visual separation, or finish a space needs.
Decorative film can give existing glass a frosted, patterned, printed, or branded appearance.
Coverage, opacity, pattern, and removability vary by material and installation method.
Frosted glass meeting room viewed from a corridor
Decorative filmsSEE THE DIFFERENCE
Drag the comparison to see how film limits the view into this space while preserving a clean, finished exterior.
WHY WINDOW FILM
For heat, glare, UV protection, daytime privacy, safety, and appearance, window film can improve the glass already in place. It is often faster and less disruptive than window replacement, and it can preserve daylight and the view that closed blinds take away.
Window film can control heat, glare, or daytime visibility while allowing the glass to remain uncovered.
A street facing condo can keep the blinds open during the day without leaving the living space exposed to people passing outside.
Privacy depends on the light balance. When it is brighter inside after dark, film alone does not provide the same privacy.
Explore privacy filmFilm adds performance, privacy, safety, or a decorative finish to otherwise serviceable windows without removing them.
A desk can stay beside the window instead of being turned toward a wall whenever afternoon sun reaches the screen.
The result depends on the film, glass, orientation, and exposure. We assess these before recommending a product.
Explore solar control filmFilms vary in heat control, light transmission, daytime privacy, safety performance, and finish.
A bright storefront and a private meeting room may need different films even when both spaces use large areas of glass.
The best fit depends on the desired result, the existing glass, the exposure, and how the space is used.
Explore window film solutionsThe glass type, construction, exposure, and desired appearance all affect which film is appropriate. We inspect the glass before recommending one.
A sealed residential window and a commercial storefront may need different products even when the problem sounds similar.
Compatibility is confirmed before a film is specified, especially when an existing window warranty is a concern.
See how we assess the glassWINDOW FILM SOLUTIONS
We recommend film according to the problem, the space, the existing glass, and the result you want, not simply by choosing the darkest option.
01
02
03
04
WHO WE WORK WITH
Privé installs residential and commercial window film across Greater Montréal. We recommend each film according to how the space is used, who uses it, and what the glass needs to solve.
01
Reduce heat and screen glare, add privacy to meeting rooms, or apply branding to interior glass.
02
Improve daytime privacy, control glare, and add protection to classroom and entrance glass.
03
Control heat and street visibility in spaces where comfort and discretion matter.
04
Improve comfort, daytime privacy, and UV protection while keeping the existing windows.
HOW IT WORKS
We identify the problem, check the existing glass, recommend the right film, and confirm the work before installation.
01
We review the space, the problem, and the existing glass.
02
We match the film to the result, appearance, and performance you need.
03
We confirm measurements, glass compatibility, scope, and pricing.
04
Certified installers complete the work cleanly and carefully.
05
You receive product guidance, warranty information, and aftercare support.
RECENT WORK
Exterior glazing and interior frost finishes.
Storefront corner glazing
The problem
Clients in the chair sat in full view of the parking lot, so the curtains stayed closed all day. The corner glass also took the afternoon sun, and the room overheated.
Film installed
XPEL Silver 15
The result
The curtains stay open. By day the glass reads as a mirror from outside, so clients stay out of view, and the room no longer overheats in the afternoon.
Interior glass partition
The problem
A clear glass partition put patients on display to everyone walking past. Blinds would have closed the room in and made it feel smaller.
Film installed
XPEL White Frost
The result
Frosted to just above eye level, so patients stay private while the clear band on top keeps the room bright and open.
West facing living room glass
The problem
After 2pm the sun came straight off the canal. The living room was too hot and too bright to use, and people on the path below could see right in.
Film installed
XPEL Evening View 15
The result
Afternoons in the living room are comfortable again, the path no longer sees in during the day, and the canal view stayed.
View project →GOOGLE REVIEWS
Feedback from residential and commercial window film customers across Greater Montréal.
5.0out of 5
23 Google reviews
Rated 5.0 out of 5 from 23 Google reviews.
Customer reviews from the Privé Window Films Google Business Profile. Quotes are shown verbatim.
Read all reviews on GoogleCOMMON QUESTIONS
Learn what film looks like, how it performs, how long it lasts, and what happens before installation.
That depends on what the glass is doing to your space. If a room is unusable in the afternoon, if the blinds have been closed since spring, or if your flooring is fading, film solves those directly, and for a fraction of what the alternatives cost. Replacing sun damaged flooring in a condo living area runs about $10,000. New cabinets, $15,000. Replacing the glass is the option almost nobody takes, because it means permits, lead times and construction in a space you are living in. Film goes onto the glass you already have, and it prevents the damage instead of paying to undo it. If your glass isn't causing you a problem, you don't need us. We'd rather tell you that on the phone than sell you something you won't notice.
Professional-grade film applied correctly does not damage glass. Whether film affects a window manufacturer's warranty depends on that manufacturer, so for newer IGU windows we confirm compatibility before recommending a film. If your windows are a concern, mention it when you reach out.
That depends entirely on the film. Privacy films have a mirror-like exterior appearance during daylight. Solar control films are nearly invisible from outside. We bring samples to every site survey so you can see exactly what the finished result looks like on your glass before committing.
Solar control films reduce glare and heat but are engineered to preserve visible light transmission. You will not feel like you are sitting in a dark room. Privacy films are a different case and we explain the light trade-off during consultation.
We serve the island of Montréal, Laval, Longueuil, and the broader South and North Shore. If you are outside these areas, send us a message. We assess projects beyond the standard zone on a case-by-case basis.
We respond within one business day. For most projects, the next step is a free site survey where we assess the glass, discuss the problem you are solving, and recommend the right film. No commitment required at that stage.
READY TO GET STARTED?
Tell us what you want to improve. We’ll review the space, recommend a suitable starting point, and confirm it against the actual glass.